Magellan MobileMapper Pro Guía De Inicio página 10

Scroll down to the Initialize option and press ENTER. Scroll
down the list of continents to highlight the continent where
you are located and then press the ENTER button. Similarly,
indicate the country where you are located and then press EN-
TER.
Finally, indicate the current time and date. If the displayed
time and date are correct, just press ENTER twice. With the
DONE field now highlighted, press ENTER again. This will take
you back to the Setup Menu screen.
Selecting your conti-
nent and your country
If the time needs to be set, change each digit one after the other.
Press the up or down arrow to increment or decrement the highlighted
figure and then press the right arrow to highlight the next figure. Re-
sume the same operation to set the highlighted figure using the up or
down arrow, and so forth. Do the same as well to set the AM/PM indi-
cator (default time is in 12-hour format so you need to set this indi-
cator). Once the time is correct, press ENTER to enable the new time.
You can now set the date, if necessary, following the same instructions
as previously. The month information is a three-letter field that you
should also set using the up or down arrow. Once the date is correct,
Setting date & time
press ENTER to enable the new date.
3. Setting Up the Receiver
While the receiver is calculating the first position, take a
minute to familiarize yourself with some of the other setup
functions. After you selected your location and pressed the
ENTER button, you should see the other setup options. If not,
press MENU and select Setup.
There are many options to select among, and all are explained
in full in the User Manual that is transferred from the CD-ROM
to your hard drive when you install MobileMapper Office. For
Menu screen, select-
the purposes of getting started, however, we will concentrate
ing the Setup option
on just a few.
4