Publicidad
Idiomas disponibles
Idiomas disponibles
Navigation
screens
Speedometer screen
Turning off unused
screens:
Because some of the
available navigation
screens may be useless
in your application, you
may want to turn them
off. To do this, press
MENU, highlight the
Setup option, press
ENTER, highlight the
Nav Screens option
and press ENTER
again. You are then
asked to turn off or on
each of the available
navigation screens.
Choose "Off" and press
ENTER for all these
screens that you are
not currently using.
Note that the Map
screen cannot be
turned off.
24
Map screen
Sat Status screen
Press NAV
Data screen
Road screen
Map screen: Shows a map of the area around your current location.
Use the IN and OUT buttons to adjust the scale.
Compass screen: Displays your heading graphically. The direction fol-
lowed is always oriented vertically and upward.
Large Data screen: Displays 4 navigation parameters in digital form
using big characters to be seen from farther.
Position screen: Shows all of the basic position, time and satellite in-
formation. Additionally, current navigation information is shown in the
bottom half of the screen.
Road screen: Presents your route as if you were traveling on a road.
Feature/waypoint and destination icons will be displayed relative to
your position as they come into view.
Data screen: Displays a high density of information, namely six data
fields plus an active compass.
Speedometer screen: Displays your speed in a familiar graphical for-
mat. There are also four additional data fields plus a trip odometer.
Satellite Status screen: The Satellite Status screen is included with
the navigation screens. It indicates conditions of GPS reception:
number of tracked satellites, their IDs and positions in the sky,
strength of received signals + battery life indicator.
Compass screen
Large Data screen
Position screen
Publicidad
