Publicidad
Idiomas disponibles
Idiomas disponibles
The Goto function can
be used for any point of
interest stored in the
receiver. To enable this
function, press MENU,
highlight Go To and
then select the point
category this point of
interest belongs to.
Waypoints are found in
the User category. All
other points of interest
are stored in the other
categories (cities, high-
ways, etc.).
A straight line is drawn
between the target and
your current location
when you enable the
Goto function
Let's choose one of the streetlights. When the cursor is
over the selected target, you will see the feature type (Str
light) displayed at the bottom of the screen. Press ENTER
to select this feature. Its attribute screen will be displayed
and you can read all the descriptions that were previously
recorded.
Now you should navigate to the "streetlight" so you can
validate the descriptions you made earlier and update
them if necessary. With the Goto field now highlighted,
just press ENTER. The receiver is already set to guide you
to this feature and the Map screen is displayed again.
Note that a straight line has been drawn between your cur-
rent location and the target feature. Press ESC to see your
heading and speed in addition to your position and that of
the targeted streetlight. You can walk in any direction.
Correct your direction of walk so that the arrow symbol
points to the streetlight and moves along the straight line
as you walk toward this feature.
You can choose any of 7 navigation screens to guide you to
the streetlight. For example the Road screen indicates
among other things the direction and remaining distance
to the feature. Most people have distinct preferences for
one or more navigation screens. Always feel free to use the
ones that work best for you. In the next page you will find
a description of all the possible navigation screens and
how you can show/hide them.
(Procedure continued on page 25)
23
Publicidad
