Publicidad
Idiomas disponibles
Idiomas disponibles
For best deep down cleaning, use the
XLO setting. However, you may need to
raise the height to make some jobs easier,
such as scatter rugs and some deep pile
carpets, and to prevent the vacuum cleaner
from shutting off. Suggested settings are:
HI – Shag, deep pile, super-soft, or
ultraplush carpets, and scatter rugs.
MED – M edium to deep pile.
LO – Low to medium pile.
XLO – The preferred setting for many
carpets and also for bare floors.
N OTE: To protect bare floors, slide the 3-
way O n/ O ff switch to the FLOOR position
to turn off rotation.
FOR BEST CLEAN IN G RESULTS
• Slide suction control toward HIG H to
increase suction for upholstery and
carpets.
• Slide suction control towards LOW
POW ER to decrease suction for
lightweight rugs or drapes.
HIG H
Increase
Suction
Decrease
Suction
LOW POW ER
• Keep the airflow passage open. Check
each assembly area in REM OVIN G
CLO G S (page 16) occasionally for clogs.
HOW TO START
VACUUMIN G TIPS
Increase suction
for upholsteries,
carpets, and
bare floors.
Decrease
suction for
draperies and
lightweight rugs.
- 12 -
CAUTION
DO N OT leave the Pow erMate
in one spot for any length of time.
Damage to carpet may occur.
CAUTION
Product Damage Hazard
Use care if the Pow erMate
left in the upright position as it may tip
over easily. Property damage can occur
if tipped.
WARN IN G
Electrical Shock Or Personal Injury
Hazard
Turn off and unplug vacuum cleaner
from outlet before checking for clogs.
SUGGESTED SWEEPIN G PATTERN
For best cleaning action, the PowerM ate
should be pushed straight away from
you and pulled straight back. At the end
of each pull stroke, the direction of the
®
PowerM ate
should be changed to point
into the next section to be cleaned. This
pattern should be continued across the
carpet with slow, gliding motions.
N OTE: Fast,
jerky strokes
do not provide
complete
cleaning.
®
running
®
and w and is
®
Publicidad
