Publicidad
Idiomas disponibles
Idiomas disponibles
2. Slide attachments onto handle as
needed. To use the bare floor brush,
align the middle hole on the floor brush
with the tab on the handle and push
onto together. The bare floor brush will
click into place. See ATTACHM EN T USE
TABLE (page 14).
ATTACHMEN TS ON WAN D
1. To remove wand from PowerM ate
wand in upright position.
2. Press wand release pedal with foot and
pull the wand straight up and out of
®
PowerM ate
.
ATTACHMENT
Crevice Tool
Bare Floor Brush
Pow erMate
®
Dusting Brush
1. Always clean attachments before using on fabrics.
2. The 3-way O n/ O ff switch should be in the FLO O R position.
ATTACHMEN TS
®
, lock
ATTACHMENT USE TABLE
e B
w t
e
n e
Furniture 1
Cushions 1
- 14 -
W and
Release
Pedal
3. Slide attachments onto wand as needed.
To use the bare floor brush, align the
side hole on the floor brush with the tab
on the wand and push onto together. The
bare floor brush will click into place. See
ATTACHM EN T USE TABLE below.
CLEANING AREA
Drapes 1
Stairs
a B
e r
C
a
p r
t e
d e
Floors
Floors/ Rugs
2
Walls
Publicidad
