Publicidad
Idiomas disponibles
Idiomas disponibles
Always follow all safety precautions when performing maintenance to the PowerM ate
WARN IN G
Electrical Shock or Personal Injury Hazard
Alw ays turn off and unplug vacuum cleaner before performing maintenance to the
vacuum cleaner. Failure to do so could result in electrical shock or personal injury from
vacuum cleaner suddenly starting.
BELT CHAN GIN G AN D BRUSHROLL CLEAN IN G
TO REMOVE BELT
1. Press handle release pedal and lower the
swivel. Turn PowerM ate
and remove the four (4) screws securing
base to PowerM ate
Side Latch
(N ot Shown)
Rear
Latch
Handle
Release
Pedal
®
2. Turn PowerM ate
the rear and side latches (A flat blade
screwdriver may be required).
POWERMATE
®
upside down
®
cover.
Swivel
Rear
Side Latch
Latch
right side up. Loosen
®
CARE
3. G rasp cover by rear and pull up to
remove it from base.
4. Lift brushroll assembly out and remove
worn belt.
Brushroll
5. Check and clean end cap areas.
See picture on page 21 for complete
brushroll assembly.
- 20 -
®
.
Publicidad
