Publicidad
Idiomas disponibles
Idiomas disponibles
1.2
Use of the control panel
•
Use the
arrow keys to move between the various menus that light up from time to time.
•
Hover over a specific function and press the
•
Pressing the key
•
In general, all flashing values can be changed using the
•
The "cancel" key
display.
1.3
Operating parameters
The operation of the appliance is determined by the Power, Ventilation and Temperature parameters set
by the user.
1.3.1
Changing the power
The power defines the quantity of heat produced by the appliance and therefore also directly affects
consumption.
To change the power:
a) Use the
keys on the power menu
b) The power value will flash; change the value using the keys
c) Press the key
to confirm the set data.
1.3.2 Changing the ventilation
To change the value of the ventilation:
a) Use the
keys on the ventilation menu
b) Change the value using the keys
• "OFF" = excludes ventilation completely and the appliance will only operate with natural convection;
• "1" minimum,...,"5" maximum;
• "A" = automatic operation (the appliance will set the speed according to the room temperature);
• "Hi" = ultra-fast operation (to be used only if there is a need to quickly heat an environment);
c) Press the
key to confirm the data entered.
1.3.3 Changing the room temperature
By changing this value, the desired room temperature is set, detected directly by a sensor located on the
appliance.
To modify the desired temperature value:
a) Move with the keys
b) The current value will flash; modify it with the
c) Press the
key to confirm the set data.
18
again confirms the change.
can be used to cancel a change; press and hold it to view an alarm code on the
and press the
:
to the temperature menu
key to change the values with the
keys.
key;
"1" minimum,...,"5" maximum)
and press the
key;
and press the key
keys;
keys.
;
004778440 - 11/01/2022
Publicidad
