Publicidad
Idiomas disponibles
Idiomas disponibles
4.2.2 Assigning program to days
With this function it is possible to assign up to three different programs to a specific day.
a) Use the arrow keys
b) Select the password "7" with the
c) Select the submenu [1] and confirm with the
d) Use the
and
keys to choose the day [d1] ... [d7] with which to associate the programs;
e) Select it with the
f) The value of the first program to be assigned will flash: P1...P6 or "OFF" to disable it;
g) Change the value with the
h) The value of the second program to be assigned will flash: P1...P6 or "OFF" to disable it;
i) Change the value with the
j) The value of the third program to be assigned will flash: P1...P6 or "OFF" to disable it;
k) Change the value with the
4.2.3 Timer enabling/disabling
a) Use the
arrow keys to go to the Timer menu
b) Confirm with the
c) Scroll with the
and
d) Press the
key to confirm the selection.
When the timer is enabled, the fixed icon
4.3 "Eco mode" saving function
By enabling this function, the appliance is switched off when the desired room temperature has been
reached. If this function is not enabled, the appliance modulates its operation to maintain the desired
temperature while consuming as little as possible.
The "Eco Mode" function is only available in configuration 1.
To enable/disable this function:
a) Use the arrow keys
b) Select the password "7" with the
c) select the submenu [7] and confirm with the key
d) Set one of the following values with the
Eco
→ It enables the "Eco Mode" function
Off
→ It disables the "Eco Mode" function
e) Press the key
to confirm the set data.
4.4 Re-ignition delta function
The re-ignition delta is the number of degrees below the switch-off temperature beyond which the ap-
pliance automatically switches on again. For example, if the appliance is set to switch off at 20°C (Eco
Mode active) and we set a "Re-ignition delta" of 4°C, the appliance will turn back on when it detects a
temperature lower than or equal to 16°C.
To change the value of the re-ignition delta:
a) Use the
arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Select the submenu [8] and confirm with the
d) the value will flash; change it using the
e) Press the
key to confirm the set data.
004778440 - 11/01/2022
ITALIANO
ENGLISH
to go to the set-up menu
key and confirm with the
key;
and
keys and press the
keys and
and press the
and
keys and press the key
key;
keys and select: "ON" to enable the timer or "OFF" to disable it.
will appear to indicate that the timer is active.
to go to the set-up menu
key and confirm with the
and
key and confirm with the
and
DEUTSCH
and press the key
key;
key;
key;
key;
to confirm the set data.
.
and press the key
key;
.
keys:
and press the
key;
key;
key;
keys "0.5 ... 5,0°C";
FRANÇAIS
ESPAÑOL
;
;
23
Publicidad
