Descargar Imprimir esta página

Palazzetti DISPLAY BLE Uso Y Funciones página 24

Ocultar thumbs Ver también para DISPLAY BLE:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4.5 Restart after a power failure
In the event of a power failure, the appliance will automatically switch back on, verifying the safety condi-
tions, when the power supply returns.
4.6 "Keyboard lock" function
With this function, it is possible to block the use of the control panel to avoid accidental changes.
To enable/disable this function:
a) Use the
arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Select the submenu [10] and confirm with the
d) Set one of the following values with the
"
"
→ Keypad lock deactivated
Off
"Lo"
→ Only the on/off key remains enabled
"
"
→ Keypad lock activated
Hi
e) Press the key
to confirm the set data.
4.7 Anti-freeze function
(in configuration 1 only)
A minimum temperature can be set below which the appliance will switch on (outside the set time bands
and only if the timer is enabled). To modify the "antifreeze" temperature value:
a) Use the arrow keys
b) Select the password "7" with the
c) Select the submenu [9] and confirm with the
d) The value will flash; change it with the
e) Press the
key to confirm the set data.
4.8 Manual activation of the pellet feed system (where present)
If it is the first use (pellet tank initially empty) or to test the loading unit operation, the load can be started
manually.
On the control panel of the appliance:
a) Use the arrow keys
b) Select the password "7" with the
c) Scroll with the
key and select the submenu [31] ;
d) Select the password "54" with the
e) When the
key is pressed and held down, the loading system is activated and the increment bars
are shown on the display.
f) When the key is released, the loading operation is halted.
Attention!
• This function is active only when the appliance is off and cold.
• Before switching it on again, make sure that there are no pellets in the burn pot.
24
key and confirm with the
and
to go to the set-up menu
key and confirm with the
and
to go to the set-up menu
key and confirm with the
key and confirm with the
and press the
key;
key;
key.
keys:
and press the key
key;
key;
keys (OFF; 3...20°C);
and press the key
key;
key;
;
;
004778440 - 11/01/2022

Publicidad

loading