Publicidad
Idiomas disponibles
Idiomas disponibles
Product Overview
A
Robot (Top View)
A1
—Power/Clean
• Press and hold to turn the robot on or off
• Press to start cleaning
—Power Indicator
• White: Battery level ≥ 20%
• Red: Battery level < 20%
• Pulsing: Charging or starting up
• Flashing red: Error
—Dock/Spot Clean
• Press to return to dock
• Press and hold to start spot cleaning
—WiFi Indicator Light
• Flashing blue slowly: Waiting for
connection
• Flashing blue quickly: Connecting
• Steady blue for five seconds: WiFi
connected
Note: Press any button to stop the robot during cleaning or docking.
A1-1—Bumper
A1-2—LiDAR Sensor
A1-3—Vertical Bumper
A1-4—Dustbin
A1-5—Dock Locator
Robot (Bottom View)
A2
A2-1—Wall Sensor
A2-2—Cliff Sensors
A2-3—Omni-Directional Wheel
A2-4—Charging Contacts
A2-5—Side Brush
A2-6—Main Wheel
A2-7—Main Brush
A2-8—Main Brush Cover Latches
Robot (Dustbin Removed)
A3
A3-1—Air Inlets
A3-2—Reset Button
Dustbin
A4
A4-1—Air Inlets
A4-2—Dustbin Latches
A4-3—Washable Filter
A4-4—Filter Latch
Dustbin (Disposable Dust
A5
Bag Pre-Installed)
Dustbin Cover
A6
Disposable Dust Bag
A7
Base
A8
A8-1—Air Duct Cover Screws (10)
A8-2—Air Duct Cover
A8-3—Screwdriver
A8-4—Base Fastening Screws (6)
Auto-Empty Dock
A9
A9-1—Dustbin Cover
07
A9-2—Dustbin
A9-3—Base
A9-4—Status Indicator Light
• Steady white: Standby
• Flashing white: Emptying
• Steady red: Malfunction
• Light off: Charging Robot/Not
Powered On
A9-5—Dock Location Beacon
A9-6—Charging Contacts
A9-7—Suction Inlet
A9-8—Electrode Brushes
Auto-Empty Dock (Cover
A10
Removed)
A10-1—Dust Bag Slot
A10-2—Filter
Power Cable Storage
A11
A11-1—Power Cable Storage Slot
A11-2—Cable Outlet
A11-3—Power Port
Note: Power cable can be pulled out at both sides.
Screwdriver
A12
Main Brush Cleaning Tool
A13
Power Cable
A14
Publicidad
