Attachments - Beurer MP 64 Instrucciones De Uso

Set de manicura/pedicura
Ocultar thumbs Ver también para MP 64:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
– Move the device over the area to be treated and apply slight pressure
while slowly moving the device in circles.
– Please note that the callus attachments show reduced performance on
soaked or wet skin. For this reason, we ask that you do not soak the foot
in water before treatment.
– To maintain natural skin protection, do not remove all calluses.
– Ensure the axle can always rotate freely. The axle must not be permanent-
ly blocked, as otherwise the device will become too hot and may become
damaged.
– Apply moisturiser to the treated areas after each use.
The device switches off if an attachment is prevented from moving for
approx. 3 seconds during use. To restart the device, switch it briefly off
and then on again.
Important:
Check the results during the treatment. This applies in particular
for diabetics as they have less sensitive hands and feet.

4.2 Attachments

Since the attachments are of a professional quality and improper use can
lead to injury, we ask that you handle the attachments carefully. At high
speeds in particular, we advise that you proceed with caution.
The following attachments are included with the device:
1 – Sapphire wheel, fine
Fine sapphire wheel, for filing and treating nails.
The special feature of this sapphire wheel is that
the internal sanding disc rotates whereas the ex-
ternal housing does not. This makes it possible
to file nails precisely without the risk of burning
the skin with the quickly rotating wheel.
2 – Sapphire wheel, coarse
Coarse sapphire wheel, for filing and treating
nails. This attachment makes it possible to
shorten even thick nails yourself. However, also
take care during use as it quickly removes large
areas of the nail.
22

Publicidad

Tabla de contenido
loading

Tabla de contenido