Vortice PHANTOM BP Manual De Instrucciones página 35

"By-Pass" Valve check
A Valve check is performed:
1) When the appliance is switched
2) After 24 h from the last By-P ass valve opening
This is a nor mal system procedure and should not be perceiv ed as a malfunction.
NOTES
- Every time, during By-Pass opening and closing (max 180 sec), Appliance automatically reduces f an-ventilators speeds
to the 20%, in order to help the By-P ass valve movement.
- In case of Temperature sensors anomalies, By-Pass valve will stay preventively closed.
When the function is active, the message "By-Pass" appears on the display: see "Home Page" in the "Operation" and use
".
"Post-ventilation" Function
This kind of function is automatically activ ate after:
- every time Pre-Heater is tur ned off (if Pre-Heater installed)
- every time you turn the Appliance off
This is a nor mal system procedure and should not be perceiv ed as a malfunction.
"Program" Function
Special mode of operation: manually enabled and allows the user to prog ram weekly air speeds. In fact, it allows you to
assign up to 6 time bands with diff
message "Progr." Appears on the display: see "Home Page" in the "Operation and Use" section. However, the speeds can
be manually changed even at specified intervals: in this case the word "Prg" will flash for 30 minutes and after it will go back
to the setted speed of the w eekly time band. If in this 30 min an y other function will change the speed, this 30 min timer
will go back to 0.
For more details on setting the time slots and dates , see "PRG Crono" in the "Oper ation and Use" section. For details
on how to activate / deactivate the function, see "Activating / deactivating Program" in the "Operation and Use" section.
"Holiday" Function
Special mode of operation: manually enabled and useful if the user lea ves the room for a longer period of time.
Operation includes:
- fixed "30% less than the Minim um " speed (no other speeds, no OFF equipment);
- environment sensors not enabled (remote inputs not actived);
- bypass always closed.
When the mode is active, the message "Holiday" appears on the display: see "Home Page" in the "Operation and Use"
section.
NOTE: Activating the Mode "Holiday" will be deactivate other product functionings/selections.
To re-activate other product functionings/selections, need to deactivate the Mode "Holiday" before.
For more details on how to activate / deactivate the function, see "Activating / deactivating Holiday" in the "Operation and
Use".
"By-Pass MAN" Function
Special mode of operation: manually enabled and useful if you want to force air replacement without heat reco very.
The operating principle is the same as: "By-Pass" function.
NOTE: If man ually enabled, the "By-Pass MAN" function will remain activ e for 12 h. After this per iod, the "By-Pass MAN"
function will come back to: Not enabled.
NOTE: (In case of "By-Pass MAN" Enabled) However you can manually deactivate the function, setting "NO" on "By-Pass
MAN Menu". After Deactivating, the operating principle will be come back the same of "By-Pass" function.
NOTE: In case of "No-Frost" function active, you can not manually activate the "By-Pass MAN" function.
When the function is active, the message "By-Pass" flashing appears on the displa y: see "Home Page" in the "Operation"
and use ". F or details on ho w to activ ate/deactivate the function, see "Activ ating/deactivating By-P ass MAN" in the
paragraph "Operation and Use".
both motors will r un at a really slo w speed to allo w repositioning
of the by-pass valve. After, motors will retur n to normal speed.
Appliance forces a By-pass activating to check the effective
position of the valve:
erent speeds , including stopping the equipment.
- if the valve is opened, force the opening;
- if the valve is closed, force the closing.
both motor-fans active (about 3 minutes) to avoid
overheating;
indoor air is extracted at the max speed (about 2
minutes) to avoid condensate presence on the heat
exchanger.
When the function is activ e, the
35