Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Alarm: No Frost - Wait one hour
The device is provided with temperature probes which measure air temper ature.
If temperatures are too low, "No Frost", "Alarm!" "Block!" appear on the "HOME" page and the f ollowing note appears on
the "Alarm" page: "Wait 1 hour". Press the [ ] appare:
Alarms
No Frost
Alarm: "Ext Probe fault"
Equipment is pro vided with a temper ature probe which measures the temper ature of air incoming from the outside . The
probe fault causes the message "Alar m!" to appear on the "HOME" page and the f ollowing note appears on the "Alar ms"
page: "Ext Probe call ser vice". Press the [] key and the following will appear:
Call Customer service to request assistance from technical personnel.
Alarm: Int Probe fault
The device is provided with a temperature probe which measures the temper ature of air being released inside . The probe
fault causes the message "Alar m!" to appear on the "HOME" page and the f ollowing note appears on the "ALARM" page:
"Int probe Call Ser vice". Press the [ ] key to access the "ALARM' menu and the following will appear:
Alarm: Exh Probe fault
The device is provided with a temperature probe which measures the temper ature of air expelled from the inside.
Press the [] key to access the "ALARM' menu and the following will appear:
Call Customer service to request assistance from technical personnel.
No frost
Wait
1 Hour
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
9
9
9
9
[
]
[
]
9
9
9
9
[
]
[
]
9
9
9
9
[
]
[
]
]
SI
9
9
9
9
[
]
]
[
]
NO
45
Publicidad
