Kärcher HD 5/13 P Manual Del Usuario página 15

Transport
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
ATTENTION
Protect the trigger from damage during
transport.
 Hold the appliance at the carrying han-
dle and the recessed grip for carrying it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
 For transport over longer distances, pull
out the push handle to the end position
and drag the appliance behind you
holding the push handle.
 In order to climb stairs, pull the appli-
ance up step by step. The skids protect
the casing from damage.
Holder for surface cleaner
 Attach the connecting piece of the sur-
face cleaner to the holder on the high-
pressure cleaner.
 Screw union nut.
Transport by crane
 Attach the lifting device to the carrying
handle of the appliance.
Safety information about cranes
DANGER
Risk of injury due to machine dropping.
– Adhere to the local accident prevention
guidelines and safety notes.
– Check the carrying handle for damage
prior to every transportation by crane.
– Check the lifting unit for damage prior to
each transport by crane.
– Only lift the appliance using the carrying
handle.
– Do not use stop chains.
– Protect the lifting device from inadvert-
ent load release.
– Remove spray lance with trigger gun,
nozzles, surface cleaner and other
loose objects prior to transportation by
crane.
– Do not transport any articles on the ap-
pliance during the lifting process.
– The appliance must only be transported
by properly trained crane personnel.
– Do not stand below the load.
– Ensure that no persons are present in
the immediate vicinity of the crane.
– Do not leave the appliance on the crane
unattended.
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
Care and maintenance
DANGER
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Safety inspection/ maintenance
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
Before each use
 Check connection cable for damages
(risk of electrical shock); get the dam-
aged connection cable replaced imme-
diately by an authorised customer ser-
vice person/ electrician.
 Check the high pressure hose for dam-
ages (risk of bursting).
– 5
EN
Storage
contract
15