Emos E5059 Manual De Instrucciones página 27

Wi-Fi Controlled Clock
Current time/date is loaded into the station automatically once it connects to a Wi-Fi network.
The icon will be displayed.
Time will be updated automatically every day at 19:00/20:00/21:00.
Long-pressing the WIFI button activates a manual search for a Wi-Fi network.
Short-pressing the WIFI button afterwards cancels the search.
Connection is indicated by an LED in the bottom right:
• LED not lit up – no Wi-Fi connection.
• LED flashing red – automatic/manual Wi-Fi search.
• LED lit up in red – Wi-Fi connected.
• LED lit up in blue – Wi-Fi connected to the cloud.
Always have the station connected to a power source when receiving Wi-Fi signal.
For more info, see the Mobile Application section.
Mobile Application
The weather station can be controlled using a mobile application for iOS or Android.
Download the "EMOS GoSmart" application to your device.
Android
Signing Up in the Application
1. Connect your device to the Wi-Fi network. Sign up in the application or enter your login if you
are already using the app, see Fig. 5-1.
2. Log into the application, tap the My Home icon and Add Device, see Fig. 5-2.
3. Enable all 3 methods of device localisation (location, wifi, bluetooth) and tap Start scanning,
see Fig. 5-3.
4. Long-press the WIFI button on the station; the red LED will start flashing.
5. The application will locate the device and the weather station icon will appear on the screen.
Press Next, see Fig. 5-4.
6. Select the same Wi-Fi network as you did on the mobile device and press Next, see Fig. 5-5.
7. The application will add the weather station to the Wi-Fi network; wait for 100 % to appear on
the screen, see Fig. 5-6.
8. The added weather station will be displayed. Press Finish, see Fig. 5-7. The weather station's
LED will glow blue.
9. An overview of measured values and the weather forecast will appear on the screen, see Fig. 5-8.
You can view the data in the central table by sliding left/right.
10. Settings icons appear at the bottom, see Fig. 5-9:
a) Alarm Options – alarm settings
b) Temp Alert – temperature alert settings
c) Graph Curve – graph of the history of temperature/humidity/pressure/wind/rainfall
d) Unit conversion – selection of temperature/pressure/wind/rainfall units
Note: in order to make changes in settings, the icon on the bottom right of the station must glow blue.
a) Alarm Options – Alarm Settings (see Fig. 5-10)
1. Tap Alarm Options and tap on the left to select the top alarm (no. 1) or bottom alarm (no. 2).
2. Set the alarm times and tap Confirm.
To activate the alarms, tap the slider on the right (alarm icons will appear on the station's screen).
(see Fig. 5)
iOS
27