Beem FRESH-AROMA-PERFECT Manual De Instrucciones página 28

EN
2. Set the minutes by pressing the button M (21).
The time is saved until a new time is set or the device has been disconnected from the
power supply for more than a minute.
Filling the Water Tank
1. Open the water tank lid (11).
2. Pour the quantity of water required for the number of cups you want (maximum 10 cups)
into the water tank (13). Only ever use water to make coffee; do not pour milk or
other liquids into the water tank!
3. Close the water tank lid. It must click audibly into place.
All of the water in the water tank is always used, regardless of the set number of
cups or coffee strength.
Adding Coffee Beans
1. Take off the lid of the coffee bean compartment (1).
Ensure that the water tank (13) is closed so that no coffee beans can fall into the water
tank.
2. Fill the coffee bean compartment (2) with coffee beans. Do not overfill it!
3. Place the lid back on the coffee bean compartment.
When you switch to another type of coffee, there will still be coffee powder from the
previous type in the grinder shaft (14). The grinder shaft may need to be cleaned before-
hand (see the "Cleaning and Care" chapter – "Cleaning the Grinder Shaft").
Setting the Grinding Fineness
Twist the coffee bean compartment (2) to the right or left so that the scale arrow on
the coffee bean compartment points to the position with the grinding fineness you want
(Picture A).
Five different levels can be chosen:
– all the way to the left: finest grinding level
– all the way to the right: coarsest grinding level
When you switch to another grinding strength, there will still be coffee powder with the
previous grinding strength in the grinder shaft (14). The grinder shaft may need to be
cleaned beforehand (see the "Cleaning and Care" chapter – "Cleaning the Grinder Shaft").
26