27
Inserting the Filter
1. Press the release button for the filter compartment (5).
2. Insert the filter insert (16) into the filter compartment.
3. Insert the permanent filter (17) or a basket filter paper into the filter insert.
4. Close the filter compartment again. It must engage audibly.
Basket filter papers are available via our website www.beem.de or from our customer service
department on request.
Setting the Number of Cups
The number of cups must be set when making coffee with coffee beans.
ton
(25) until the display (19) shows the number of cups you want (2, 4, 6, 8 or 10 cups).
The selected number of cups is saved until a new number of cups is set or the device has
been disconnected from the power supply for more than a minute.
Setting the Coffee Strength
The coffee strength can be set when making coffee with coffee beans.
(26) until the coffee strength you want is shown on the display (19).
Weak coffee
Medium coffee
Strong coffee
The selected coffee strength is saved until a new coffee strength is set or the device has
been disconnected from the power supply for more than a minute.
"Added Flavour" Function
The brewing time can be extended with the "Added Flavour" function. The extended brewing
time will give your coffee a more intense flavour.
We recommend that you only use the "Added Flavour" function for 2 or 4 cups. This is
because the brewing time for 6, 8 or 10 cups is long by default. An even longer brewing
time could make the coffee too bitter.
1. Press the
"Added Flavour"
of cups.
appears on the display (19).
2. Press the
"Added Flavour"
Keep-Hot Function
The device has a keep-hot function which can be switched on and off using the button
We recommend switching on the keep-hot function when using the device with a glass jug. The
keep-hot function must be switched off when using the device with a thermal jug.
button
to extend the brewing time for the chosen number
button
again to switch the extended brewing time off again.
EN
Keep pressing the but-
Keep pressing the button
(23).