Kärcher BDS 43/180 C Manual Del Usuario página 11

Safety Devices
Safety devices serve to protect the user
and must not be rendered in operational or
their functions bypassed.
Lock
Prevents the appliance from being
switched on accidentally. To start the appli-
ance, first press the unlock button and then
the ON/OFF switch.
Install the push rod
Prior to operation, the push rod must be in-
stalled as shown and the appliance has to
be connected to power.
Illustration on the inside of the front
cover
Device elements
1 Actuator, disc brush / pad driver plate
2 Brush / pad driver plate with pad
3 Clamp for level adjustment
4 Switch ON / OFF
5 Handle
6 Unlocking button
7 Dosing lever for detergent solution (option)
8 Fuse for brush drive
9 Detergent tank (option)
10 Cable hook
11 Motor casing
12 Power cord
 The power cord must be checked regu-
larly for damages, such as cracks or ag-
ing. If damage is found, the cable must
be replaced before further use.
 Check appliance for damage, have
damages repaired by customer service.
Power connection
For connection values, see technical
–
data and type plate.
The electrical connections must be
–
done by an electrician according to IEC
60364-1.
Danger
Risk of electric shock.
Do not drive over the mains cable.
–
Danger
Risk of injury.
Never wrap the mains cable around
–
your body or your neck.
Do not let the mains cable come in contact
–
with the rotating brushes or rotating pads.
– 2
EN
Start up
11