Attach the brush/pad
Disconnect the mains plug from the socket.
Loosen the clamps of the level adjust-
ment.
Swivel the tension lever to the front into
a horizontal position.
Tighten the clamps of the level adjustment.
Tilt the appliance rearward.
Place the disc brush/driver plate onto
the actuator and turn in anti-clockwise
direction.
Fill the detergent tank (option)
Warning
Risk of damage. Only use the recommend-
ed detergents. With respect to different de-
tergents the operator bears the increased
risk regarding the operational safety and
danger of accident. Only use detergents
that are free from solvents, hydrochloric
acid and hydrofluoric acid.
Follow the safety instructions for using de-
tergents.
Fill detergent solution into the detergent
tank.
Operation
Warning
Risk of injury! The operation of the appli-
ance requires practice.
Ensure that there are no obstacles in
–
the area to be cleaned.
Check the floor consistency for its suit-
–
ability.
The handling becomes more difficult
–
with uneven or rough surfaces.
12
Warning
Risk of accident due to loss of control over
the appliance. Do not adjust the handle un-
less the motor is at a standstill.
Loosen the clamps of the level adjust-
ment.
Tilt the handle into a comfortable posi-
tion (arms outstretched).
Tighten the clamps of the level adjust-
ment.
Turning on the Appliance
Caution
Risk of damage to the floor covering. Do
not operate the appliance on the spot.
Insert the mains plug into a socket.
Set handle to working height.
Hold the handle with both hands.
Press and hold the unlocking button.
Use the ON/OFF switch.
Release the unlocking button.
Release the switch to interrupt operation.
Control the direction
Left: Press the handle downward.
–
Right: Raise the handle.
–
Apply the detergent solution to the floor
or use the dosing lever of the detergent
tank (option).
Move the appliance over the surface to
be cleaned.
Repeat process for severe contamina-
tion.
Afterwards, pick up the wastewater with
a wet vacuum or a cloth.
– 3
EN
Adjust handle
Cleaning