Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
ISTRUZIONI PER L'USO
• When the accessory is in operation, care should be taken not to distract the operator's attention.
• Before using the accessory, the operator has to have an unobstructed view of the operating area, which has to be suitably lit, to
avoid accidents to personnel and damage to the tools and equipment.
• The operator should not leave the accessory unmanned for long periods of time when under load. If this is not possible, the
operator has to ensure that there is no danger to personnel or equipment.
DESCRIPTION OF THE CARRIAGE
The thrust or chain driven carriage for Robur hoists is suitable for the fixing and horizontal movement of portable hoists, moved by
hand or chain, on structural beams (such as INP, IPB, IPE, HEA, HEB, etc).
It is built using high quality materials and is of compact, lightweight, easy to handle design. It is portable and easy to install, due to
the drawbar eye fixed to a regulator pin with right and left threading.
Movement takes place by pushing the carriage in the required direction in the case of the thrust driven model, or by adjusting the
guide chains in the chain driven model.
TECHNICAL SPECIFICATIONS
TABLE "A"
081470005
081470010
081470020
081470030
081470050
10
8147S_8147C.indd 10
8147S_8147C.indd 10
Fig. 1
A
B
C
225
173
292
252
188
300
300
226
310
360
289
324
392
313
329
E
F
L min
30
25
50
35
30
58
47
40
66
58
48
74
70
60
90
EN
I
L max
WLL
220
0.5 t
220
1 t
220
2 t
220
3 t
220
5 t
28/02/22 17:37
28/02/22 17:37
Publicidad
