Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
ISTRUZIONI PER L'USO
TABLE "B"
081470505
081470510
081470520
081470530
081470550
ITEMS OF PERSONAL PROTECTION EQUIPMENT TO BE WORN
SAFETY FOOTWEAR
PROTECTIVE GLOVES
HARD HAT
INSTALLATION
Before starting the installation, read the general warning notices. In addition:
• Check the WLL of the accessory to ensure that it has sufficient load-bearing capacity.
The accessory should only be connected to the lifting sling after all the following preliminary checks have been carried out.
• The beam on which the carriage is to be mounted and the load-bearing structure in general have to be sufficiently stable to allow
loading to take place in a safe manner.
• Before starting any task, check for visible defects and faults, such as deformation, cracks, wear and tear and signs of corrosion
on the carriage, drawbar eye, the unit connected and the load-bearing structure. Also check to ensure that the unit and load are
hooked up correctly.
• Check the condition and correct operation of the unit connected by referring to the instructions in the user and maintenance
manual
Once these checks are successfully complete, place the load in position and make sure that:
• The load connection device is resting fully on the load hook and the safety lock can be closed fully.
• The load applied to the accessory is free to line up with its anchorage point.
8147S_8147C.indd 11
8147S_8147C.indd 11
Fig. 2
A
B
C
225
173
292
252
188
300
300
226
314
360
289
350
392
313
359
E
F
L min
30
25
50
35
30
58
47
40
66
58
48
74
70
60
90
EN
I
L max
WLL
220
0.5 t
220
1 t
220
2 t
220
3 t
220
5 t
11
28/02/22 17:37
28/02/22 17:37
Publicidad
