Reset Keypad Programming To Factory Defaults - DSC Power Serie Manual De Referencia

[101]-[228] Door Chime for Zones 1-128
The keypad can be programmed to make up to four different chime sounds for individual zones. (e.g.,
for Zone 1, enter Section [101], for Zone 2 enter Section [102]). Default: 01 |_____|_____|
Option
01 6 beeps
02 Bing-Bing tone
03 Ding-Dong tone
04 Alarm tone (4 second duration)
05 Zone Name

[991] Reset Keypad Programming to Factory Defaults

1. Press [*][8][Installer Code].
2. Enter [991].
3. Use the [<][>] keys to scroll to the applicable keypad.
4. Press [*] to select the keypad.
5. Re-enter [Installer Code].
6. Press [*] to reset the selected keypad to factory defaults.