Comet Spa CPS 50 E Manual Del Usuario página 26

TABLE OF CONTENTS
1. GENERAL INFORMATION
1.1. MANUAL PURPOSE
1.2. TERMINOLOGY AND SYMBOL LEGEND
1.3. PRODUCT IDENTIFICATION
1.4. SPECIFIC USE
1.5. TECHNICAL MODIFICATIONS
2. SAFETY INFORMATION
2.1. BASIC RECOMMENDATIONS
2.2. NOISE AND VIBRATIONS
3. HANDLING INFORMATION
3.1. PACKING LIFTING AND TRANSPORT
3.2. CHECKS UPON DELIVERY
3.3. UNPACKING
3.4. LIFTING AND TRANSPORT: MACHINE,
BATTERY AND BATTERY CHARGER
4. INSTALLATION INFORMATION
4.1. BATTERY
4.1.1. BATTERY PREPARATION
4.1.2. BATTERY INSTALLATION
4.1.3. BATTERY CONNECTION
4.1.4. CIRCUIT BOARD SETTINGS CONFIGURATION
4.2. BATTERY CHARGER CONFIGURATION
5. OPERATING INFORMATION
5.1. MACHINE PREPARATION
5.2. STRUCTURE AND FUNCTIONS
5.3. BATTERY CHARGING
5.4. SQUEEGEE ASSEMBLY
5.5. SQUEEGEE DISASSEMBLY
5.6. SQUEEGEE BLADES DISASSEMBLY /
ASSEMBLY
5.7. SQUEEGEE ADJUSTMENT
5.8. SPLASH GUARD ASSEMBLY/ DISASSEMBLY
5.9. BRUSH ASSEMBLY / DISASSEMBLY
5.10. FILLING AND DRAINING THE SOLUTION
TANK
5.11. DRAINING THE RECOVERY TANK
5.12. SPECIFIC INSTRUCTIONS FOR THE USE OF
MODEL AC 230V
5.13. DRIVING THE MACHINE
5.14. WORK METHOD
5.14.1. PREPARATION AND WARNINGS
5.14.2. BATTERY CHARGE LEVEL CONTROLS
5.14.3. DIRECT SCRUBBING OR FOR SLIGHTLY
DIRTY SURFACES
5.14.4. INDIRECT SCRUBBING OR FOR VERY DIRTY
SURFACES
5.14.5. POST-SCRUBBING OPERATIONS
6. MAINTENANCE INFORMATION
6.1. TANKS
6.2. SUCTION HOSE
6.3. SQUEEGEE
6.4. ACCESSORIES
6.5. MACHINE BODY
6.6. BATTERIES
6.7. THERMAL BREAKERS
6.8. PERIODIC MAINTENANCE
6.9. RECOMMENDED SPARE PARTS
7. OPERATING CHECKS
7.1. THE MACHINE DOESN'T WORK
7.2. THE MACHINE DOESN'T MOVE
7.3. THE BRUSH DON'T ROTATE
7.4. NOT ENOUGH OR TOO MUCH DETERGENT
7.5. NO SUCTION
7.6. INSUFFICIENT SUCTION
7.7. THE BRUSH MOTOR OR THE SUCTION
MOTOR DOESN'T STOP
7.8. THE SQUEEGEE DOESN'T CLEAN OR DRY
EFFICIENTLY
7.9. THE BATTERY CHARGER DOESN'T WORK
7.10. THE BATTERIES DO NOT CHARGE OR DO
NOT HOLD A CHARGE
8. CONDITIONS OF WARRANTY
8.1. SCRAPPING OF THE MACHINE
8.2. DISPOSAL (WEEE)
26