Pari LC SPRINT Instrucciones De Uso página 80

6 TROUBLESHOOTING
Contact the manufacturer or distributor:
– in the event of faults that are not listed in this chapter
– if the suggested procedure does not correct the fault
Fault
No aerosol is
coming out of
the nebuliser.
7 TECHNICAL DATA
7.1 General nebuliser data
5
Size
5
Weight
Operating gases
Minimum compressor flow
Minimum operating pressure
Maximum compressor flow
Maximum operating pressure
Minimum fill volume
Maximum fill volume
5) Without mouthpiece; unfilled.
Possible cause
The nebuliser nozzle
is blocked.
The connection
tubing is not connec-
ted properly.
The connection
tubing is leaking.
– 36 –
Remedy
Clean the nebuliser.
Check that the tubing con-
nectors are connected firmly
to the compressor and the
nebuliser.
Replace the connection
tubing.
10 cm × 10 cm × 4 cm
31 g to 33 g
Air, oxygen
3.0 l/min.
0.5 bar / 50 kPa
6.0 l/min.
2.0 bar / 200 kPa
2 ml
8 ml