SICK HTB18 Manual De Instrucciones página 34

OPERATING INSTRUCTION
1.4 Product description
1.5 Operating and status indicators
1.6 Mounting
34 O P E R A T I N G I N S T R U C T I O N | HTB18(L)
2 1 3
2
3
4
Mount the sensor using a suitable mounting bracket (see the SICK range of accesso‐
ries).
NOTE
Note the sensor's maximum permissible tightening torque of 0.56 Nm.
Note the preferred orientation of the sensor relative to the direction of object motion,
refer to figure 9.
Potentiometer adjustment (if
1
selected by model configuration) or
LED Indicators
Green LED: supply voltage active
2
(with IO Link, flashes when IO Link
Communication is active)
Yellow LED: status of received light
3
beam (with IO Link, when teach
mode is active)
Signal strength light bar (if selected
4
by model configuration)
8017850.1HW2/2022-11-14 | SICK
Subject to change without notice