Candy CFT63/1X/1 Manual De Instrucciones página 7

Method B See Pic3:
1. Drill 4 holes of Ø 6mm at the bottom of the hanging cupboard.
2. Put the one way valve on the air outlet of cooker hood, then install the
cooker hood on the bottom of the cupboard, tighten the cooker hood with
enclosed 4 screws.
3. Install the adjusted board on the bottom of the hood in order to keep out
the gap between hood back and cupboard.
Noice: There are 2 methods for ventilation, including ' horizontal ventilation'
and ' vertical ventilation'. Please pay attention to the ventilation method when
installation.
Horizontal ventilation: See Pic 4A, please use the cover to seal the outlet on the
top, then the air can be vented from back.
Vertical ventilation: See Pic 4B, please use the cover to seal the outlet on the
back, then the air can be vented from top.
6
Pic 2