Publicidad
Idiomas disponibles
Idiomas disponibles
6.3
V-SHOCK EDGE Fall Clearance Charts
V-SHOCK EDGE Single PFL
Product: V-SHOCK EDGE PFL
Use: Leading edge applications
Capacity: ≤ 310 lbs (141 kg)
(A) Clearance values shown are based on 0 ft (0 m)
anchorage setback from the leading edge.
Anchorage connector may be used at setback
distance of 0 ft (0 m)* from the leading edge or as far
back as required. For every 1 ft (0.3 m) the
anchorage location is set back from the leading edge,
the user can subtract 0.5 ft (0.15 m) from the
clearance provided in the chart based on the user's
offset distance.
NOTE: Clearance chart anchorage location for
illustrative purposes only.
WARNING!
* In leading edge applications with 0 ft (0 m) setback, ensure that setup does not allow snaphook to contact leading edge
in the event of a fall.
Failure to follow this warning can result in serious personal injury or death.
US
6 ft V-SHOCK EDGE PFL: 6 ft / 1.8 m Length
10 ft V-SHOCK EDGE PFL: 10 ft / 3 m Length
V-SHOCK & V-SHOCK EDGE PFL
V-SHOCK EDGE Twin PFL
ILLUSTRATION NOT TO SCALE
6 Fall Clearances
18
Publicidad
