MSA V-SHOCK Manual De Instrucciones página 8

3 Product Specification
Inspection/Removing Product From Service
PFLs that have arrested a fall or are unable to pass an inspection shall be tagged "UNUSABLE" and disposed of in
l
accordance with local regulations.
Due to the nature of some fall arrest events, it is possible for the load indicator to not deploy. In the event that a PFL is
l
subjected to fall arrest forces and the load indicator does not deploy, the PFL still must be removed from service and
marked as "UNUSABLE" until it has been destroyed.
If the load indicator is deployed, immediately remove the PFL from service and mark it as "UNUSABLE" until it has
l
been destroyed.
Failure to follow these warnings can result in serious personal injury or death.
3 Product Specification
System Requirements
Component
Anchorage Connector Standard
Harness Standard
Connectors Standard
Retractable Type Fall Arresters
Structure Strength
NOTE: The product may comply with standards shown. See product label for specific compliance information. Those
designated with a certification mark are listed with the corresponding agency as compliant to the applicable standard.
PFL Materials
Component
Case
Drum
Pawl, Swivel Assembly,
Main Spring
Lifeline
Connectors
Energy Absorber
Energy Absorber Pouch
4 Harness Attachment
WARNING!
DO NOT rely on feel or sound to verify proper connector engagement. Ensure the connector is closed before use.
Failure to follow this warning can result in serious personal injury or death.
9
ANSI/OSHA
ANSI Z359.18/OSHA 1926.502,
1910.140
ANSI Z359.11/OSHA 1926.502,
1910.140
ANSI Z359.12/OSHA 1926.502,
1910.140
ANSI Z359.14/OSHA 1926.502,
1910.140
3600 lbs (16 kN) certified 5000 lbs (22.2
kN) non-certified
Material
Nylon
Aluminum
Steel
1.00" (25.4mm) wide / 0.14" (3.6mm) thick HMPE / para-aramid blend OR1.00" (25.4mm)
wide / 0.11" (2.8mm) thick Polyester
Steel OR Aluminum
Nylon
Polyester
V-SHOCK & V-SHOCK EDGE PFL
CSA
CSA Z259.14/CSA Z259.15
CSA Z259.15
CSA Z259.12
CSA Z259.2.2-17
5000 lbs (22.5 kN)
US