Selecting A Screen Size Automatically; Detecting Side Masks - Pioneer PDP-LX608G Manual De Instrucciones

Useful adjustment settings
AV source
Item Description
4:3 For 4:3 "standard" pictures. A side mask appears on each
side.
FULL 14:9 For 14:9 squeeze pictures. A thin side mask appears on each
side.
CINEMA 14:9 For 14:9 letterbox pictures. A thin side mask appears on
each side, and you may also see bars on the top and bottom
with some programs.
WIDE In this mode the picture is progressively stretched toward
each side of the screen
FULL For 16:9 squeeze pictures
Dot by Dot Matches input signal to the same number of screen pixels
(selectable for 1080i or 1080p signals only)
ZOOM For 16:9 letterbox pictures. Bars may appear on the top and
bottom with some programs.
CINEMA For 14:9 letterbox pictures. Bars may appear on the top and
bottom on some programs.
PC source
Item Description
4:3 Fills the screen without altering the input signal aspect ratio
FULL Full 16:9 screen display
AV source
4:3
CINEMA FULL 14:9
ZOOM CINEMA 14:9
Dot by Dot WIDE
FULL
Note
• While receiving High Definition video signals, pressing f
switches among FULL, Dot by Dot, ZOOM, WIDE, and 4:3.
• Some HD broadcasts may display 4:3 content with side masks,
which may cause uneven wear. After viewing it is
recommended to view full-screen motion video (see Detecting
side masks).
PC source
4:3
FULL

Selecting a screen size automatically

The plasma television automatically selects an appropriate screen
size when the received video signals contain WSS (wide screen
signaling) information or when video signals are received from a
connected HDMI equipment (see Using the HDMI Input on
page 46). To activate this function, use the following procedure.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Auto Size" (/ then ENTER).
4 Select "Natural" or "Wide-Zoom" (/ then ENTER).
Item Description
Off
Deactivates the Auto Size function
Natural Naturally adjusts the image to the screen
Wide-Zoom Enlarges and displays only the 4:3 aspect ratio portion in full
and wide screen
5 Press HOME MENU to exit the menu.
Note
• Manually select an appropriate screen size if an image does
not automatically switch to a correct screen format.
• When the video signal contains no aspect ratio information,
the function will not work even with "Natural" or "Wide-Zoom"
selected.

Detecting side masks

Some HD broadcasts may display 4:3 content with side masks. The
plasma television automatically detects these side masks to
provide gray side masks when "Natural" has been selected for
"Auto Size", or display the image full screen with the side masks
removed when "Wide-Zoom" has been selected. This function does
not operate when "Off" is selected for "Auto Size".
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Side Mask" (/ then ENTER).
4 Select "Detection" (/).
5 Select "On" (/).
Item Description
Off Deactivates the Side Mask detection
On Activates the Side Mask detection
6 Press HOME MENU to exit the menu.
Important
• The "On" setting prevents uneven wear on 4:3 content and side
masks and can reduce the possibility of image retention.
09
39
En