Shure AD4Q Manual De Instrucciones página 29

Port Function and Signals
Network
Mode
Port 1
Shure con­
SWITCHED trol, Dante
primary
SPLIT/RE­
DUNDANT Shure con­
(Factory trol
setting)
To configure the switch mode:
1. Device Configuration > Network Configuration.
2. Select Setup to enter the Switch Configuration menu.
3. Use the control wheel to change the mode.
4. Press ENTER to reboot the receiver and change the mode.
Diagram of switched mode:
Port 3 (Pri­
Port 2
mary)
Shure con­ Shure con­
trol, Dante trol, Dante
primary primary
Shure con­ Dante pri­
trol mary
Application
Port 4 (Secon­
dary)
Shure control, For single network installations of star or
Dante primary daisy-chained networks.
Primary and secondary ports are configu­
Dante secon­ red are separate networks to provide isola­
dary tion between control signals and audio sig­
nals.
Shure Incorporated
29/44