Shure AD4Q Manual De Instrucciones página 30
Ocultar thumbs
Ver también para AD4Q:
- Manual de instrucciones (41 páginas) ,
- Manual del usuario (42 páginas)
Publicidad
IP Address Configuration
An IP address must be assigned to each device in the network to ensure communication and control between components. Va
lid IP addresses can be assigned automatically using a DHCP server or manually from a list of valid IP addresses. If using
Dante audio, a separate Dante IP address must also be assigned to the receiver.
Automatic IP Addressing Mode
1.
If using a DHCP capable Ethernet switch, set the DHCP switch to ON.
2.
From the Device Configuration menu: Network Configuration > Next
3.
Press the control wheel to enable editing of the Mode, and then set the mode to Automatic.
Manual IP addressing Mode
1.
From the Device Configuration menu: Network Configuration > Next
2.
Press the control wheel to enable editing of the Mode, and then set the mode to Manual
3.
Set valid IP addresses and subnet values, and then press ENTER to save.
Shure Incorporated
30/44
Publicidad
