Descargar Imprimir esta página

Bosch ACS 763 Manual Original página 52

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 124
en
52 | ACS 763/863 | Introduction
3.5
Icons key
Symbol
Description
HELP to view information about the current
screen.
MENU to access additional functions and
parameters.
AUTO to activate a menu that facilitates the
setting of an automatic recovery/vacuum/loss
check/charge function.
RECOVERY to activate the refrigerant
recovery sequence from the A/C system of
the vehicle.
VACUUM to activate the vacuum function in
the A/C system of the vehicle to remove air
and condensate.
CHARGE to activate the charge sequence
of the A/C system of the vehicle with a
programmed amount of refrigerant.
DATABASE to view information about the
amount of charge according to the model of
the vehicle.
NEXT to switch to the next screen or
process.
BACK to return to the previous screen or
process.
ON/OFF to enable or disable the selected
function.
OK to confirm, proceed, or save settings.
ESC to cancel the operation and return to
the previous function or the Main Menu.
UP allows to move the functions selection of
a menu upward.
DOWN allows to move the functions
selection of a menu downward.
PRINT to print.
BACKSPACE to erase the character to the
left of the cursor.
PAUSE to pause a process.
PLAY to resume a paused process.
REPEAT to repeat the last function.
DELETE to delete the selected item from the
station memory.
BLUETOOTH indicates that the Bluetooth
connection is enabled.
WIFI indicates that the WiFi connection is
enabled.
HS LS to set which side to charge (high
pressure, low pressure or both
ml oz to set the unit of measurement (ml or
oz).
kg oz lb to set the unit of measure (kg, oz or
lb).
USB to export data to a USB key.
|
SP00D00490
2019-03-05
3.6
Setup Menu
3.6.1
Functions Menu
1. Call up the Main Menu.
2. Select
3. Select
Select Functions to access the following functions.
Function
A/C Perfomance Test Performs a pressure test on an A/C
Nx Test
Flush Hoses
System Flush
Tank Fill
Refrigerant Tracking To store the amount of refrigerant
Select
sides).
.
.
Description
system of a vehicle inside which
refrigerant is already
present.
To find leaks on a vehicle A/C plant using
an external nitrogen cylinder or a mixture
of nitrogen and hydrogen.
To clean the station from oil residues in
preparation for maintenance of the next
vehicle.
Provides a method for removing oil by
forcing liquid refrigerant through the A/C
system or components of an A/C system.
After flushing, the refrigerant is recovered
from the machine and filtered by the
recirculation circuit.
To transfer the refrigerant from an
external tank to the internal tank.
The tank refill value can be adjusted
according to the user's needs. Refer
to the Tank refilling procedure in the
Maintenance section.
recovered and charged for each vehicle.
The display shows five selection options:
+ Display: to display the recovered and
charged refrigerant data.
+ Export to USB: to export the report
with the amount of refrigerant
recovered and charged on the vehicle.
The data is exported via USB stick,
recommended size at least 2 GB and
formatted FAT (key not supplied). The
data is transferred as a .csv file.
+ Erase all records: to delete all the data
stored on the station.
+ Print all records: to print all the data
stored on the station.
+ Disable Tracking: to disable the
refrigerant report function.
to return to the Setup Menu.
Robert Bosch GmbH

Publicidad

loading

Este manual también es adecuado para:

Acs 863Acs 863-oe