Descargar Imprimir esta página

SMA SUNNY TRIPOWER X 12 Instrucciones Breves página 10

Ocultar thumbs Ver también para SUNNY TRIPOWER X 12:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69
3 Symbols on the Product
DHCP Server is recommended.
The DCHP server automatically assigns the appropriate network settings to your nodes in the
local network. A manual network configuration is therefore not necessary. In a local network,
the Internet router is usually the DHCP server. If the IP addresses in the local network are to be
assigned dynamically, DHCP must be activated in the Internet router (see the Internet router
manual). In order to receive the same IP address by the internet router after a restart, set the
MAC address binding.
In networks where no DHCP server is active, proper IP addresses must be assigned from the
free address pool of the network segment to all network participants to be integrated during
commissioning.
A country data set must be set for feed-in operation
To ensure the inverter begins feed-in operation during initial commissioning, a country data set
must be set (for instance via the installation assistant on the user interface of the product, or via
a communication product).
If no country data set is set, then feed-in operation will be stopped. This state is signaled by the
green and red LEDs flashing simultaneously.
The inverter will automatically start feed-in operation only after the inverter configuration is
completed.
The country data set must be set correctly.
If you select a country data set which is not valid for your country and purpose, it can cause a
disturbance in the PV system and lead to problems with the grid operator. When selecting the
country data set, you must always observe the locally applicable standards and directives as
well as the properties of the PV system (e.g. PV system size, grid-connection point).
• If you are not sure which standards and directives are valid for your country or purpose,
contact the grid operator.
3
Symbols on the Product
Icon
Explanation
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Observe the documentations
Observe all documentations supplied with the product.
10
STPxx-50-IS-xx-10
SMA Solar Technology AG
Quick Reference Guide

Publicidad

loading