Selco WF 109 Instrucciones De Uso página 32

3.5 Test screen
When the side panel (coil compartment) is open, the welding
operations are inhibited.
The test screen appears on the LCD display.
1
Cooling unit test
2 Allows the selection of the welding process
MMA
ARC AIR
TIG
MIG/MAG
Pulsed MIG/MAG
3
Wire feed
4
Gas test
5 Wire speed
Allows the regulation of the wire feed rate.
Minimum 1 m/min, Maximum 22 m/min,
Default 1.0m/min
6
Side panel open
3.6 Main Screen
Allows the control of the system and of the welding process,
showing the main settings.
1 Heading
Allows the display of certain pieces of important infor-
mation relating to the selected process:
- The synergic curve selected
32
1a Type of filler metal
1b Wire diameter
1c Type of gas
- The program or the synergic curve retrieved
1d
Program retrieved
Synergic curve retrieved
Process retrieved
1e Number of the program/synergic curve retrieved
- The real current and voltage values during the welding
phases
1f Current reading
1g Voltage reading
2 Welding parameters
Select the required parameter by pressing the encoder but-
ton.
Adjust the value of the selected parameter by rotating the
encoder.
2a Parameter selection bars
2b Parameter icon
2c Parameter value
2d Unit of measurement of the parameter
PROCESS PARAMETER 1
MMA
ARC AIR
TIG
MIG/MAG
Pulsed MIG/MAG
PARAMETER 2