Roadstar HRA-270CD+BT Manual De Instrucciones página 6

3 English
CLOCK AND DATE SETTING
Press and hold [MENU/INFO] button (8) , enter "Main menu" – "Time setup" - "Set
time" (use [SELECT] knob (10) to select and confirm);
To set DATE/CLOCK, rotate [SELECT] knob (10) clockwise or anticlockwise to ad-
just Date and clock. Press [SELECT] knob (10) to confirm each operation.
To set auto update , select "Auto update", "From radio" Each step needs to be con-
firmed by pressing the [SELECT] knob (10).
Analog/digital clock in stand by: Power off product, long press [CLOCK] button
(21) to change analog to digital and viceversa.
SETTING ALARMS
This unit can set two alarms.
Long press [ALARM] button (4). Rotate [SELECT] knob (10) to choose Alarm 1/
Alarm 2. Confirm pressing [SELECT] knob (10).
Press [SELECT] knob (10) to confirm each operation.
You can chose OFF, Daily, Once, Weekdays or weekends. Confirm with [SELECT]
knob (10).
To set time , rotate [SELECT] knob (10) clockwise or anticlockwise to adjust.
To set days , rotate [SELECT/SNOOZE/TUNE] knob (10) to select 4 modes among
once , weekdays , weekends and daily.
To set modes , rotate [SELECT] knob (10) to select 3 outputs DAB , FM and Buzzer.
To set volume , rotate [SELECT] knob (10) clockwise or anticlockwise to increase or
decrease the volume.
Press Confirm with [SELECT] knob (10) once to turn on the clock , press [SELECT]
(10) button again to turn off the clock.
Press "Save" after all settings being done.
The Alarm symbol will be displayed on the LCD after it is successfully set.
You can set two alarms at the same time.
The alarm will ring 1 hour , you can press any button to terminate the alarm or press
[SELECT] knob (10) to enter snooze mode , you can choose snooze time among
5/10/15/30 minutes by pressing [SNOOZE] button (10) repeatedly, stop when you
are on the time you wish to set , the snooze time will be stored automatically. If you
set 5 minutes snooze , after 5 minutes , alarm will ring again , press "Snooze" button
again to keep on snoozing if needed. Only 1 alarm can enter Snooze mode.
SLEEP TIMER
Press [SLEEP] button (4) to enter sleep mode, sleep mode is defaulted off and
"sleep timer" will be displayed on the LCD , press "Sleep" button again to turn on the
"sleep timer", press [SLEEP] button (4) repeatedly to set sleep timer among
15/30/45/60/90/120 min , stop when you are on the timer you wish to set , the "sleep
timer" will be stored automatically.
After the "sleep timer" is successfully set , sleep time will be displayed on the LCD.