Roadstar HRA-270CD+BT Manual De Instrucciones página 8

5 English
CD-MP3 OPERATION
Select "CD" mode by turning the [FUNCTION] button (3);
Press [OPEN/CLOSE] (6) to open the CD DOOR and place a CD with the label up in the
CD compartment.
Close the CD DOOR. Playback will start automatically from the first track.
Use [PLAY/PAUSE] (10) knob to play or pause CD/MP3. Rotaring [SELECT] (10) knob
you can chose next/prevous track. Press [PLAY] (10) to confirm.
MP3 Folder: you can change folder with 18/19 buttons on Remote control.
Pressing [P-MODE] (8) or [REP] button (17 on remote control) you can chose to RE-
PEAT track: normal, single repeat, repeat all or shuffle.
USB OPERATION
Select "USB" mode by turning the [FUNCTION] knob (1);
Plug an USB stick into the [USB PORT] (3);
Playback will start automatically from the first track.
Press the [SELECT/SNOOZE/TUNE] knob (10) to choose play or pause.
Rotate [SELECT/SNOOZE/TUNE] knob (10) to play previous song or next song.
Press the [PRESET] (7) button to choose play modes: normal, single repeat, all re-
peat, shuffle.
BLUETOOTH OPERATION
Select "BT" mode by by turning the [FUNCTION] knob (3);
Connect your Bluetooth portable device to the ID Bluetooth tagged as "HRA-
270CD+BT"; You can now transfer the music to the HRA-270CD+BT.
Note: Music control (play, pause, etc) can be setting by radio if device supports this
function.
AUX-IN OPERATION
Use one male RCA to male 3.5mm jack cable (not included) to connect any external
audio device to the [AUX-IN SOCKET] (12). Select "AUX" mode by turning the
[FUNCTION] knob (3). Note: Music control (play, pause, etc) must be done from your
external device.