Corghi Artiglio 50 Manual De Uso página 69

Never reduce the pressure of tyres when they are hot.
Tyres which have not been used for at least one hour, or have travelled not more than 2
or 3 kilometres at low speed, can be considered cold.
The inflation pressures when cold must be those specified for the car by the car or tyre
producer.
For heavy-duty operating conditions (e.g. continuous high speeds, towing trailers, etc.),
where this is not already specified by the car's handbook, the recommended cold pres-
sures should be increased by 0.3 bar.
ATTENTION
The "Spare Parts" manual does not authorise the user to do any work on the machine
except for that specifically described in the operator's manual, but does enable the
user to provide accurate information to the after-sales service, in order to reduce
service times.
WARNING
CORGHI declines all liability for claims deriving from the use of non-original spares
or accessories.
ATTENTION
Any operation intended to modify the setting value of the relief valves or pressure
limiter is forbidden.
The manufacturer declines all liability for damage resulting from tampering with
these valves.
WARNING
Before making any adjustments or carrying out maintenance, disconnect the electric-
ity and compressed air supplies from the equipment and make sure that all moving
parts are suitably immobilised.
ATTENTION
Do not remove or modify any parts of this equipment except in the case of service
interventions.
DANGER
When the machine is disconnected from the air supply system, the devices marked
with the warning sign shown above may remain pressurised.
- The filter+regulator+lubricator is equipped with a semiautomatic condensation drain
device. This device operates automatically whenever the compressed air supply to the
machine is cut off. Drain the condensation by hand (button C, fig. 7) when the level rises
Operator's manual Artiglio 50
MAINTENANCE
GB
69