Locating A Disc By Name; List-Up; Selecting Specific Tracks For Playback; Bank - Sony XR-C8220 Manual De Instrucciones

Ocultar thumbs Ver también para XR-C8220:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Locating a disc by name

— List-up (For a CD unit with the custom
file function or MD unit)
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to "Labelling
a CD" (page 22).
1
During playback, press (LIST)
momentarily.
The name assigned to the current disc
appears in the display.
DISC
When you assign a disc memo label to a CD
TEXT disc, it takes priority over the original
CD TEXT information.
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (6) (ENTER) to play back the disc.
Notes
• After a disc name has been displayed for five
seconds, the display goes back to normal
playback mode. To turn off the display, press
(DSPL).
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, "NO Disc"
appears in the display.
• If a disc has not been assigned a custom file,
"********" appears in the display.
• If the disc information has not been read by the
unit, "?" appears in the display. To load the disc,
first press the number button, then choose the
disc that has not been loaded.
• There are also some letters which cannot be
displayed (during MD or CD TEXT disc playback).
24
Selecting specific tracks
for playback

— Bank

(For a CD unit with the custom file function)
If you label the disc, you can set the unit to
skip or play the tracks of your choice.
1
During CD playback, press (SHIFT), then
press (4) (PLAY MODE) for two seconds.
Bank edit mode
DISC
TRACK
RLAY MODE
ENTER
Note
If you have not labeled the disc, the bank edit
mode does not appear and the programme
edit mode appears. To go back to normal
playback mode, press (4) (PLAY MODE) for
two seconds.
2
Push the SEEK/AMS control up or down
to select the track number you want to
skip and press (6) (ENTER).
DISC
TRACK
RLAY MODE
ENTER
The indication changes from "Play" to
"Skip." If you want to return to"Play,"
press (6) (ENTER) again.
3
Repeat step 2 to set the "Play" or "Skip"
for all the tracks.
4
Press (4) (PLAY MODE) for two seconds.
The unit returns to normal CD playback
mode.
5
Press (SHIFT).
Notes
• You can set "Play" or "Skip" for up to 24 tracks.
• You cannot set "Skip" for all the tracks on a CD.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido