Publicidad
Idiomas disponibles
Idiomas disponibles
Conform to the regulations of the local electric company
when wiring the power supply.
For the refrigerant recovery work (collection of refrigerant
from the pipe to the compressor), stop the compressor
before disconnecting the refrigerant pipe.
.
Before carrying out the installation, maintenance, repair or
removal work, set the circuit breaker to the OFF position.
Otherwise, electric shocks may result.
Do not touch the aluminium fin of the unit. You may injure
yourself if you do so. If the fin must be touched for some
reason, first put on protective gloves and safety work
clothing, and then proceed.
Install the air conditioner securely in a location where the
base can sustain the weight adequately. If the strength is
not enough, the unit may fall down resulting in injury.
The unit can be accessed from the service panel.
Install a circuit breaker that meets the specifications in
the Installation Manual and the stipulations in the local
regulations and laws.
Install the circuit breaker where it can be easily accessed by
the agent.
Under no circumstances the power wire must not be
extended. Connection trouble in the places where the wire is
extended may give rise to smoking and/or a fire.
Upon completion of the installation work, tell the user where
the circuit breaker is located. If the user does not know
where the circuit breaker is, he or she will not be able to
turn it off in the event that trouble has occurred in the air
conditioner.
5-EN
– 3 –
CAUTION
This Air Conditioner uses R410A an environmentally
friendly refrigerant.
T
Tighten the flare nut with a torque wrench in the specified
manner.
Wear heavy gloves during the installation work to avoid
injury.
A
.
6-EN
Publicidad
