Publicidad
Idiomas disponibles
Idiomas disponibles
the regulator knob out and turn
counter-clockwise to set the outlet
pressure to zero when removing
hose or accessories to prevent
hose backlash.
grasp air hose in hand when
installing or disconnecting to
prevent hose whip.
use damaged or worn accessories.
pressure causes a hazardous risk of
bursting. check the manufacturer's
maximum pressure rating for
air tools and accessories. The
regulator outlet pressure must
never exceed the maximum
pressure rating.
customer Responsibilities
Check Safety Valve
Drain Tank
Air Filter
Air compressor pump
intake and exhaust valves
1- more frequent in dusty or humid conditions
N015838
Risk of Flying
Objects. Pull
Risk of unsafe
operation. Firmly
Risk of unsafe
operation. Do not
Risk of Bursting.
Too much air
MAiNTeNANCe
Before
each
use
compressed air from the unit may
contain wa ter condensation and
oil mist. Do not spray unfiltered air
at an item that could be damaged
by moisture. Some air tools and
accessories may require filtered
air. Read the instructions for the air
tools and accessories.
How to Start
1.
Turn the Auto/Off lever to "Auto"
and allow tank pressure to build.
Motor will stop when tank pres-
sure reaches "cut-out" pressure.
2.
Pull the regulator knob out and
turn clockwise to increase pres-
sure. When the desired pressure
is reached push knob in to lock in
place.
unusual noise or vibration is noticed,
stop the compressor immediately and
have it checked by a trained service
technician.
The compressor is ready for use.
Daily
or after
each
use
X
X
14- ENG
Risk of unsafe
operation.
Risk of unsafe
operation. If any
Every
Yearly
100
hours
X
1
X
Publicidad
