6
Technical Information
Electromagnetic Compatibility – This meter meets the electromagnetic immunity requirements as per
EN ISO 15197 Annex A. The chosen basis for electrostatic discharge immunity testing was basic standard
IEC 61000-4-2. In addition, the meter meets the electromagnetic emissions requirements as per EN 61326.
The meter's electromagnetic emission is thus low. Interference from the meter to other electrically-driven
equipment is not anticipated.
Performance Analysis – Refer to the test strip package insert.
Test Principle – Refer to the test strip package insert.
Product Safety Information
w
WARNING
• Choking hazard. Small parts. Keep away from children under the age of 3 years.
• Strong electromagnetic fields may interfere with the proper operation of the meter. Do not use the
meter close to sources of strong electromagnetic radiation.
• To avoid electrostatic discharge, do not use the meter in a very dry environment, especially one in
which synthetic materials are present.
Discarding the Meter
w
WARNING
• During blood glucose testing, the meter itself may come into contact with blood. Used meters
therefore carry a risk of infection. Before discarding the meter, remove the battery or batteries.
Discard used meters according to the regulations applicable in your country. Contact the local
council and authority for information about correct disposal.
• The meter falls outside the scope of the European Directive 2002/96/EC – Directive on waste
electrical and electronic equipment (WEEE).
• Discard used batteries according to local environmental regulations.
38