Technical Information; Product Limitations - Accu-Chek Nano Manual Del Usuario

8

Technical Information

Product Limitations

See the literature packaged with the test strips and control solution for the latest information on product specifications and
limitations.
Specifications
Blood volume
Sample type
Measuring time
Measurement range
Test strip storage conditions
System operating conditions
Relative humidity operating range
Meter storage conditions
Memory capacity
Automatic power o
Power supply
Display
Dimensions
Weight
Construction
Protection class
Meter type
Control solution storage conditions
Electromagnetic Compatibility – This meter meets the electromagnetic immunity requirements as per EN ISO 15197 Annex A.
The chosen basis for electrostatic discharge immunity testing was basic standard IEC 61000-4-2. In addition, the meter meets
the electromagnetic emissions requirements as per EN 61326. The meter's electromagnetic emission is thus low. Interference
from the meter to other electrically-driven equipment is not anticipated.
Performance Analysis – Refer to the test strip package insert.
Test Principle – Refer to the test strip package insert.
42
Refer to the test strip package insert.
Temperature: -13–158 °F
500 blood glucose results and 20 control results with time and date
2 minutes
Two 3-volt lithium batteries (coin cell type CR2032)
LCD
69 × 43 × 20 mm (LWH)
Approx. 40 g (with batteries)
Hand-held
III
The Accu-Chek Nano meter is suitable for continuous operation.
Refer to the control solution package insert.