Publicidad
Idiomas disponibles
Idiomas disponibles
Getting started
MACHINE SETTING
Advanced functions via the built-in interface
Despite its minimalistic design, you can set several advanced functions through the built-in control panel.
However, for the best user experience, we recommend you to use the free Landroid Vision app to do this, given its much richer
and intuitive interface.
General settings
Navigation
Page *
Working time
Security
* Be continuously updated according to the software version.
** For after-sales service only
1. Settings (See Fig. 27)
Rotate the
clockwise to choose between General Settings, Working Time and Security. Press the
, working time
or security
the follow-up actions.
2. Set date & time (See Fig. 28)
Rotate the
clockwise to select "DAY" and press the
clockwise to select the desired number and press the
minute.
3. Set a Schedule (See Fig. 29)
Following the same instructions as date & time, use the
Vision. Border cut can also be enabled/disabled for each day. Anticlockwise rotate
schedule, it is recommended to download the Landroid Vision app.
4. Customize work time (See Fig. 30)
This feature enables a quick adjustment of daily work time without the need to change work times for each individual day.
Anticlockwise rotate
to activate the setting. For example, if you wanted to increase total work schedule to compensate for
a higher growth rate during the peak of mowing season, simply rotate the
Conversely, if you wanted to decrease total work time to compensate for the latter half of the mowing season when growth rates
slow, simply rotate the
to an appropriate negative percentage decrease. This setting can also be adjusted via the app.
This adjustment follows a simple calculation:
DWT x [1+ (WT%/100)] = TWT
DWT = Daily work time
WT% = Work time percentage adjustment
TWT = Total work time
Example:
24
Language
Time format
Date format
Set date & time
Rain start delay
App link
Diagnose**
Auto Work Time
Customize work time
Define zones
Customize work zone
Change PIN code
Auto-Lock
, and press
once to enter. To go back one, press the
. The selected number will be blinking; continue to rotate the
to confirm. Use the same method to complete for month/year/hour/
to select the day of the week and set the time to schedule Landroid
to select General settings
key. Use the same method to take
to activate the setting. For aquicker way to
to an appropriate positive percentage increase.
EN
Publicidad
