Handicare SIMPLICITY+ Manual De Instalación página 10

Power pack
Loading the power pack
Items required:
• Power pack
• Fit Kit
Track end cap x 1
Green bag
Wood screws x 12
Final limit stops x 1
End stops x 1
Busbar pickup loading tool
MINIVATOR SIMPLICITY + INSTALLATION MANUAL
10
Tools required:
• Loading toggle
• Shorting links
Note: The grub screws on the end cap should not
be over tightened. If the power supply is being
connected at the top of the stairs, ensure that the
power supply cable is fed through the channel
provided so that it exits the track on the WALL side.
13 Now slide the top end stop and final limit stop so
that they sit against the positioning extensions of
the end cap and then tighten the grub screws.
Note: The final limit stop jacking screw should only
be used if the final limit is not being recognised
when the pack is run on the track. Tighten one
full turn max after contact (Figure 29).
Figure 22
Figure 23