Handicare SIMPLICITY+ Manual De Instalación página 27

5
Code:
5
Meaning:
Bot stop – Right hand.
Top stop – Left hand.
Telephone fault finding action:
Ask client to tap trunnion guards in case they are stuck.
If this does not correct the fault – send engineer.
On site fault finding action:
Check end limit circuit and trunnion guards.
7
Code:
7
Meaning:
Low voltage.
Telephone fault finding action:
Ask client to drive lift to charge contacts – if 'Okay' code does not
show send engineer. If the lift will not drive – send engineer.
On site fault finding action:
Drive lift to charge contacts. Check charging circuit if 'Okay' code not
displayed. If lift will not drive replace batteries and check charging circuit.
Code:
9
Meaning:
Up direction – Left hand.
Down direction – Right hand.
Telephone fault finding action:
None.
On site fault finding action:
None.
Code:
b
Meaning:
Switch active.
Telephone fault finding action:
Send engineer.
On site fault finding action:
A short circuit has occurred on toggle circuit – check circuit.
Description:
End limits activated.
Description:
Batteries approaching critical level.
Description:
Shows when toggle switch
is activated in down/up direction.
Description:
A switch is active at power on
i.e. Toggle Up, Toggle down,
IR up IR down or learn.
6
Code:
6
Meaning:
Bot pressure – Right hand.
Top pressure – Left hand.
Telephone fault finding action:
Ask client to tap footplate edges. If this does not correct the fault
– send engineer.
On site fault finding action:
Check footplate bottom and downside and chassis underpan.
8
Code:
8
Meaning:
Up direction – Right hand.
Down direction – Left hand.
Telephone fault finding action:
None.
On site fault finding action:
None.
A
Code:
A
Meaning:
Hinge is open.
Telephone fault finding action:
None.
On site fault finding action:
None.
C
Code:
C
Meaning:
IR address fail.
Telephone fault finding action:
Send engineer.
On site fault finding action:
Reprogram handsets.
MINIVATOR SIMPLICITY + INSTALLATION MANUAL
Appendix 1
Description:
Safety edge (down/up direction)
activated – footplate, underpan.
Description:
Shows when toggle switch
is activated in up/down direction.
Description:
Description:
The IR address (dip switch)
does not match.
27