Handicare SIMPLICITY+ Manual De Instalación página 2

MINIVATOR SIMPLICITY + INSTALLATION MANUAL
2
Minivator Simplicity +
Installation Manual
Smart Seat
Pre-installation check list
1 Check that all of the required components
are available. You should have 7 boxes.
These are colour coded so that identification
of any handed components is simple. The
table below shows the colour of the boxes
that you require.
COMPONENT
Smart Seat base
Smart Seat back
Power pack
Fitting Kit
Smart Seat Upholstery
Bottom Track Section
Top Track Section
e.g. a left hand lift comprises 1 purple and
6 blue boxes; a right hand lift comprises 1
green and 6 blue boxes.
2 Installation tools required
• Loading toggle
• Shorting links
• 10mm spanner
• 10mm socket
• Narrow nosed pliers
• 13mm socket
• 17mm socket
• Side cutters
• 8mm spanner
• 13mm spanner
• 17mm spanner
Note: The installation engineer must check
with Minivator for the latest installation
manual issue number.
Issue No of this manual is 0410-1
Left hand Right hand
Purple Green
Blue
• No. 2 Pozi-drive
• 2.5mm llen key
• 3mm llen key
• 4mm llen key
• 5mm llen key
• 6mm llen key
(ball ended)
• 8mm llen key
• Spirit level
• Handlamp