Handicare SIMPLICITY+ Manual De Instalación página 13

Figure 33
Figure 34
Figure 35
Fitting the seat base
Items required:
• Seat base
• Cover plate
• 2 x clips
1 Depending upon the hand of the stairlift being
fitted, remove the appropriate knock-outs from
the chassis top rear cover (Figure 36 – Left
hand shown). Refer to the table below for
the number of knock-outs to be removed
for the client height.
Required seat
to footplate
height (mm)
560
535
510
485
460
450
Figure 36
MINIVATOR SIMPLICITY + INSTALLATION MANUAL
Seat base
Tools required:
• 10mm socket
• 13mm socket
• Narrow nosed pliers
• 6mm llen key
Knock-outs
to be
removed
1
2
3
4
5
5
13