Handicare SIMPLICITY+ Manual De Instalación página 16

Electrical connections / chassis covers
Electrical connections
Items required:
• None
1 Make seat and footplate electrical connections
(Figure 46).
a Connect the key switch loom
(orange and green).
b Connect the toggle loom
(white, blue and brown).
c Connect the safety edge loom
(flat six way connection: 2 x brown,
2 x red and 2 x violet).
d Connect the six way footplate loom.
POWERED FOOTPL TE ONLY
e Connect the powered footplate looms
(twin yellow and grey comms).
POWER SWIVEL ONLY
f Connect the grey powered swivel loom.
g Connect the shielded swivel loom earth
ring terminal.
2 Test the function of the powered features,
including the toggle (see pages 22/23).
Fit the front chassis covers
Items required:
• Top front chassis cover
• Bottom front chassis cover
1 Clip in the bottom front cover and fit the panel
fixing push studs.
2 Fit the top front cover and secure with the
supplied panel fixing push studs (Figure 47).
MINIVATOR SIMPLICITY + INSTALLATION MANUAL
16
Tools required:
• None
Tools required:
• Side cutters
Figure 46
Figure 47