Handicare SIMPLICITY+ Manual De Instalación página 15

Fitting the seat back
Items required:
• Seat back
Redundant connections are present to allow
easy re-handing of seats. Connections must be
made according to the handing of the stairlift;
i.e. for a stairlift with left-hand toggle switch
and key switch (always together on one side),
those connections must be made to left hand
arm. The right arm will then house a powered
footplate switch (if fitted).
1 Place the seat back onto the seat base and
using a ball ended 6mm Allen key secure it
with the four bolts and washers provided
(Figure 42).
2 Make the upper seat wiring connections as
follows (Figure 43);
a Key switch connection:
green and orange to green and orange.
b Toggle switch: blue, white and brown to
blue, white and brown
RM SWITCHED POWERED
FOOTPL TE ONLY
c Powered footplate:
Twin Yellow to twin Yellow
Note: The toggle switch connection must be
made through the interlock loom to enable
the arm interlock functionality (Figure 44).
3 Tidy the cables to the back of the seat
(Figure 45).
Tools required:
• 6mm ball ended llen key
Figure 42
Figure 43
Figure 44
Figure 45
MINIVATOR SIMPLICITY + INSTALLATION MANUAL
Seat back
15