Pentair BIOSHIELD PRO Guía De Instalación Y Usuario página 6

6
SECTION 2: HEALTH AND SAFETY PRECAUTIONS
HAZARDOUS SITUATIONS & APPROPRIATE ACTIONS
SITUATION LOCATION
Lamp or Quartz
UV Vessel
Sleeve Removal
Broken Quartz
UV Vessel
Sleeves/ UV Lamps
UV Lamp
UV Vessel
Replacement
Drain UV Vessel UV Vessel
Vessel Cleaning UV Vessel
Electrical Work UV System
BioShield® PRO UV System Installation and User's Guide
HAZARD
Isolate UV system from water source, shutdown system
Burn using external On/ Off switch and lock-out disconnect
from input power source.
Handle quartz sleeves and UV lamps with extreme care,
Sharp Object
wear clean cotton gloves.
Blue-Light DO NOT operate UV lamps outside the UV vessel, wear
Hazard protective eye wear against ultraviolet light.
Isolate UV system from water source and shutdown
system using external On/Off switch and lock-out/
Pressure
disconnect from input power source. Open valves
carefully to relieve pressure and drain the UV Vessel.
Isolate the UV vessel and secure against unauthorized
Corrosive/
operation. Wear appropriate protection equipment. No
Chemical
smoking or food allowed.
Shutdown system using the UV system's external On/
Off switch and lock-out/disconnect from input power
Electrical Shock
source. All electrical work should be carried out by
authorized and qualified personnel only.
ACTIONS